Built-in closet with own hands: saving space and money

How to make a closet with their own hands. Ready-made drawings and assembly of parts of your future closet. What materials and fittings are needed to make this furniture. If you want to win free space in the apartment, you can make a built-in closet with your own hands. For its functionality, the design has received well-deserved popularity https://urbanwardrobes.co.uk/services/fitted-folding-wall-beds.

The name came to us from the Middle Ages, when the nobility rode through the narrow streets for secret rendezvous. For convenient exit from the carriage in the narrow streets of remote parts of the city, the court master Mr. Jeantot invented sliding doors, which later got the name of a compartment.

Types of designs

The peculiarity of such designs is the presence of doors that slide parallel to the plane of the facade of the product. Closets can be built into a niche, closely placed with the elements of the interior. There are several types of designs:

• Installed in an alcove or across the width of the wall;
• made as a room divider, in this variant it is possible to make two-way access.

The minus of the first design is the impossibility of moving the product to another place. There are no special canons for the installation of wardrobes-compartments - it all depends on your imagination. You can make a corner wardrobe-compartment with your own hands, create a design with radius facades.

Preparatory work

Before you make such a wardrobe-compartment, you need to choose the material. Not only the cost, but also the durability of the product depends on this. The best material in the production of furniture is considered solid wood. The main disadvantage is its high cost and difficulty in finding large width boards. If a built-in model is planned, it should be taken into account that in niches there is often high humidity, and the wood can warp because of this.

Plywood is also used. These are sheets of special veneer, glued under pressure, with the number of layers, a multiple of 3. It is four times stronger than solid wood and is also affected by moisture. When using natural materials, the sheets must be treated with olive oil.

Chipboard panels - compressed wood chips using phenol-formaldehyde resins. They use chemical compounds, so it is better to buy laminated sheets. Their disadvantage is that they do not hold fasteners well.

The fine fraction (MDF) has the properties of natural wood and is made by modern technology. Chips from the processing of solid wood are processed into dust, squeezed at high temperature, released natural lignin, which is a binder. This creates a very strong material that can hold fittings well.

Taking measurements

Often, closets with dimensions not exceeding the standard, plan to put in a niche. This allows you to save on materials, advantageously use the space of the room. This option is the easiest to manufacture. Knowing the basic principle, you can build any wardrobe-compartment with your own hands, drawings will be required for the layout of the necessary elements.

In the manufacture of cabinets, the correct geometry is not always observed. Sometimes you get not quite right angles. Inexperienced people may say that this is a trifle and a couple of millimeters will not play a role, but when the design does not get to the planned place, to correct something is already too late, so the width of the opening is measured in several places with a step of 30 cm. A similar method is used to determine the height from floor to ceiling. Particular attention must be paid to sockets, switches and doorways, so that the product does not overlap any of the above.

‍